.zssmi-donduakoi zpiodudi, una. 20 stern ave. springfield, new jersey 07081 u.s.a. telephone: (973) 376-2922 (212) 227-6005 fax: (973) 376-8960 MRF1001A electrical specifications (tease - 25c) static [off] symbol bvceo bvebo bvcbo icbo vce(sat) test conditions collector-emitter breakdown voltage (1c = 5.0 madc) emitter-base breakdown voltage (ic= 0.1 madc) collector-base breakdown voltage (ic=1.0madc) collector-base (vcb= 10vdc) collector-emitter saturation voltage (1c = 50ma, ic/ib = 10) value min. 20 3.5 30 - - typ. - - - 50 100 max. - - - - - unit vdc vdc vdc ma mv (on) hfe dc current gain (1c = 50 madc, vce = 5.0 vdc) 50 - 300 - dynamic symbol fi test conditions current-gain - bandwidth product (1c = 90 madc, vce = 14 vdc, f = 300 mhz) value min. - typ. 3.0 max. - unit ghz nj semi-conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. information furnished b> nj semi-conductors is believed to be both accurate and reliable at the time of going to press. however, nj semi-conductors assumes no responsibility for any errors or omissions discovered in its use. \ semi-conductors enuniniges customers to verify that datasheets nre current before plating orders.
MRF1001A functiinal symbol u max mag |s2lf test conditions maximum unilateral gain (1) maximum available gain insertion gain 1c = 90 madc, vce = 14vdc, f = 300 mhz 1c = 90 madc, vce = 14vdc, f = 300 mhz 1c = 90 madc, vce = 14vdc, f = 300 mhz value min. - - 10 typ. 11.5 11.7 11.13 max. - - - unit db db db table 1. common emitter s-parameters, @ vce = 14 v, 1c = 90 ma f (mhz) 100 200 300 400 500 600 700 800 900 1000 si |s11| .165 .113 .061 .003 ,063 .069 .135 .179 .282 .362 1 zcj, -17 -77 63 -49 117 140 150 144 146 132 ?5' |s21| 9.7 5.2 3.6 2.7 2.3 1.9 1.9 1.7 1.6 1.5 z(j) 98 80 76 66 57 54 48 39 33 36 s19 |s12| .058 .115 .169 .225 .281 .320 .397 .447 .476 .510 z(|> 79 73 76 68 61 60 58 49 44 47 s99 |s22| .411 .302 .298 .287 .235 .245 .232 .237 .215 .220 z -32 -36 -42 -67 -80 -90 -104 -124 -157 -177
MRF1001A to-39 a b c d e f g h minimum inches/mm .350/8,89 .315/8,00 .240/6,10 .015/0,38 maximum inches/mm .370/9,40 .335/8,51 .260/6,60 .045/1,14 .500/12,70 .016/0,41 .029/0,74 .028/0,71 .019/0,48 .040/1,02 .034/0,86 j k l minimum inches/mm .095/2,41 .095/2,41 .190/4,83 maximum inches/mm .105/2,67 .105/2,67 .210/5,33
|